Changes in reproductive life-history strategies in response to nest density in a shell-brooding cichlid, Telmatochromis vittatus

To determine whether the appearance of a reproductively parasitic tactic varies, and how this variation affects territorial males of the Lake Tanganyika cichlid fish Telmatochromis vittatus, we examined the reproductive ecology of territorial males in Mtondwe and compared it with that of a neighboring Wonzye population, where nest density differs from that at Mtondwe. In Wonzye, with high nest density, male tactics change with their body size from a territorial to a non-territorial parasitic tactic called piracy in which they conquer several nests defended by territorial males and take over the nests while females are spawning. These “pirate” males could decrease the costs incurred by travelling among nests by exclusively targeting aggregations of nests in close proximity while avoiding separate nests. Territorial males in Wonzye sacrifice the potential higher attractiveness offered by large nests and instead compete for nests farther from neighbors on which pirates less frequently intrude. In contrast, the Mtondwe population had lower nest density and piracy was absent. Given that the success of piracy depends on the close proximity of nests, nest density is likely responsible for the observed variation in the occurrence of piracy between the two populations. Furthermore, in Mtondwe, territorial males competed for larger nests and were smaller than the territorial males in Wonzye. Thus, this lower nest density may free territorial males from the selection pressures for increased size caused by both defense against nest piracy and the need to develop into pirates as they grow.     

Analysis of coordinated circling and linear flights of a lycaenid butterfly species

Circling and linear flights of a hairstreak Chrysozephyrus smaragdinus were recorded in natural habitat with a high-speed video camera. Circling flight paths were resolved into rotation and shift components; values on X- and Y-coordinates of the butterfly position were separately extracted against time and fitted with a regression line composed of a sinusoidal curve and a linear line. From the obtained parameters, diameter, rotation number, and flight velocity were calculated. Flapping movements were also analyzed. Two types of circling flights, horizontal and vertical, were discriminated. In both flights, the rotation diameter was about 10 cm, rotation number of 3/s, flight velocity of 0.9 m/s, and wing-beat frequency of 20/s. The coordination of paired butterflies in circling flight showed a higher correlation in the horizontal circling flight. In the vertical circling flight, butterflies accelerated the downstroke speed of the wing in the ascending phase. They flew about four times faster in linear flights than in circling flights due to the higher frequency of wing beats.     

PCDDs, PCDFs, and coplanar PCBs in wild terrestrial mammals from Japan: congener specific accumulation and hepatic sequestration

The present study determined the contamination levels and congener-specific accumulation features of dioxins and related compounds (DRCs) in wild terrestrial mammals such as large Japanese field mice (LJFM), lesser Japanese moles (LJMs), and raccoon dogs (RDs) collected from Kanto region in Japan during 2001. The toxic equivalent quantity (TEQ) levels in the carcasses or adipose tissues were in the order of RDs > or = LJMs > LJFM. Comparison of DRC congener profiles in the three species and principal component analysis (PCA) demonstrated a higher contribution of OCDD, T4CB77, and P5CB118 in LJMs. Analysis of liver-adipose distribution of DRC congeners in RDs showed that livers contained significantly higher TEQs than adipose tissues, indicating that liver is a depository organ and critical for determining the toxicokinetics of DRCs. As for most T4, P5, H6CDD/DFs and for P5CB126, H6CB169 and mono-ortho PCB congeners, their liver/adipose concentration ratios in RDs revealed a tendency to increase with hepatic TEQ levels, suggesting TEQ-dependent hepatic sequestration.     

Estimating the generation of recycled metals from obsolete motorcycles in Vietnam for ELV management

Journal of Material Cycles and Waste Management - The demand for various modes of transportation has significantly increased around the world due to rapid urbanization, the increase in population,...     

Ultrastructural alterations on chloride cells of the yellowtail Seriola quinqueradiata,following exposure to the red tide species Chattonella antiqua

By means of scanning and transmission electron microscopy, the influence of the red tide species Chattonella antiqua was examined with respect to the surface ultrastructures of chloride cells of the yellowtail Seriola quinqueradiata. Conspicuous ultrastructural alterations occurred on the apical surface of these cells. The majority of chloride cells in the control gills showed an apical surface with numerous cellular extensions, while more than half the chloride cells affected by red tide organisms exhibited an apical surface with fewer and smaller extensions, a wrinkled apical surface, or a protruded apical surface. These ultrastructural alterations of chloride cell surface may be due to the partial disturbance of salinity by C. antiqua, and reflect the changes of the ion-transport function in yellowtail gills exposed to red tide water.     

Heavy metal removal from aqueous solution using carbonaceous K2S-impregnated adsorbent

A novel carbonaceous adsorbent for heavy metal removal was prepared from raw coal by one-step simple sulfur impregnation using K2S. Raw coal was mixed with K2S powder and then heated at 800°C for 30 min in nitrogen to produce K2S char. The sulfur content and form in K2S char were determined, and the ability of K2S char to adsorb Zn2+, Cd2+ and Pb2+ was examined. The K2S impregnation was e ective at impregnating sulfur into coal, especially in the form of elemental, thiophenic and sulfatic sulfur. The sulfur content of K2S char was higher than those of raw coal and pyrolysis char. The Zn2+ removal in 2.4 mmol/L of Zn2+ solution by K2S char was higher than raw coal with the removal rate of 100%. K2S char adsorbed Pb2+ and Cd2+ in 24 mmol/L of Pb2+ and Cd2+ solution with the removal rate of 97% and 35%, respectively. The elution extents of adsorbed Pb2+ and Cd2+ were zero in distilled water and 27% in 0.1 mol/L HCl solution. These results indicated that an e ective adsorbent for heavy metal ions was prepared from coal using K2S sulfur impregnation, and that the adsorbed metals were strongly retained in K2S char.     

Molding Method, Thermal and Mechanical Properties of Jute/PLA Injection Molding

Natural composites have been important materials system due to preservation of earth environments. Natural fibers such as jute, hemp, bagasse and so on are very good candidate of natural composites as reinforcements. On the other hand regarding matrix parts thermosetting polymer and thermoplastic polymer deriver form petrochemical products are not environmental friendly material, even if thermoplastic polymer can be recycled. In order to create fully environmental friendly material (FEFM) biodegradable polymer which can be deriver from natural resources is needed. Therefore poly(lactic acid) (PLA) polymer is very good material for the FEFM. In this paper jute fiber filled PLA resin (jute/PLA) composites was fabricated by injection moldings and mechanical properties were measured. It is believable that industries will have much attention to FEFM, so that injection molding was adopted to fabricate the composites. Long fiber pellet fabricated by pultrusion technique was adopted to prepare jute/PLA pellet. Because it is able to fabricate composite pellets with relative long length fibers for injection molding process, where, jute yarns were continuously pulled and coated with PLA resin. Here two kinds of PLA materials were used including the one with mold releasing agent and the other without it. After pass through a heated die whereby PLA resin impregnates into the jute yarns and sufficient cooling, the impregnated jute yarns were cut into pellets. Then jute/PLA pellets were fed into injection machine to make dumbbell shape specimens. In current study, the effects of temperature of PLA melting temperature i.e. impregnation temperature and the kinds of PLA were focused to get optimum molding condition. The volume fractions of jute fiber in pellet were measured by several measuring method including image analyzing, density measurement and dissolution methods. Additionally, thermal and mechanical properties were investigated. It is found that 250° is much suitable for jute/PLA long fiber pultrusion process because of its less heat degradation of jute, better impregnation, acceptable mechanical property and higher production efficiency. Additionally the jute fibers seem much effective to increase deflection temperature under load, tensile modulus and Izod strength.     

Biogeochemical model (BGC-ES) and its basin-level application for evaluating ecosystem services under forest management practices

It is important for humans to live in harmony with ecosystems. Evaluation of ecosystem services (ES) may be helpful in achieving this objective. In Japan, forest ecosystems need to be re-evaluated to prevent their degradation due to lack of forest management.In order to evaluate the effects of forest management on forest ES, we developed a process-based biogeochemical model to estimate water, carbon, and nitrogen cycles in forest ecosystems (BGC-ES). This model consists of four submodels: biomass, water cycle, carbon-nitrogen (CN) cycles, and forest management. The biomass submodel can calculate growth of forest biomass under forest managements.Several parameters of the model were calibrated using data from observations of evapotranspiration flux and quality of stream flow in forests. The model results were compared with observations of runoff water from a dam catchment site and with carbon flux observations.Our model was coupled with a basin-level GIS database of forests. Evaluations under various forest management scenarios were carried out for forests in a basin contained in the Ise Bay basin (Chubu region, Japan), where plantations (artificial forests) seemed to have degraded from poor forest management.Comparing our simulation results with those of forests without management in the basin, we found that the amounts of absorbed carbon and runoff were larger in managed forests. In addition, the volume of harvested timber was larger and its quality (diameter) was better in managed forests. Changes of ES within the various scenarios were estimated for their economic value and were compared with the cost of forest management.     

Comparison of the changes in temperatures among rural, urban and metropolitan areas around the Inland Sea in Japan

We investigated the changes in temperatures in Takamatsu, Tadotsu and Osaka areas in Japan. Data of temperatures in Takamatsu (urban area: 1942-2009), Tadotsu (rural area: 1893-2009) and Osaka (metropolitan area: 1883-2009) areas around the Inland Sea in Japan was obtained from Japan Meteorological Agency. The changes in temperatures in three areas in Japan were analyzed and compared. By using data from 1942 to 2009, various parameters of temperatures were significantly correlated with years. The changes in mean temperature in August and in a year in Takamatsu area for 50 years were highest (August: 1.6°C, Year: 1.8°C) among three areas. In addition, correlation coefficient rate between years and the number of days over the level of 34°C in August in Takamatsu area was highest (r = 0.567, p < 0.0001). Parameters of temperatures were gradually increased with years in all three areas. The heat island effect in Takamatsu area was similar to Osaka area in Japan.